Template in PowerPoint format sized at 42" wide by 42" high.
Poster Template_TECBIO_REU.pptx (42inch by 42inch)
Template in PowerPoint format sized at 42" wide by 36" high.
Poster Template_TECBIO_REU.pptx (42inch by 36inch)
The editor in ssh not easy to use, I suggest you create the html and upload via sftp.
If you do not have a sftp client already, an easy one to use is Filezilla
Use ssh or sftp to login into linux-ts.it.pitt.edu
Login using your PITT username and password.
Your web files are under the public/html folder.
You are able to view the page at http://www.pitt.edu/~username
For example this page is at https://www.pitt.edu/~gengkon.
The space has a quota of 5 MB which is normally sufficient for basic html.
Larger files such as pictures and archives may be hosted on the pitt.box.com site and linked.
You can also increase your available space by following these steps:
1. Log into https://accounts.pitt.edu
2. Click the "EMAIL & MESSAGING" tab
3. Click the "UNIX QUOTA" link from the dropdown
4. Click the "Increase My UNIX Quota" button (if you have less than 500MB of quota remaining)
Pitt Technology Website. Check links at bottom for your operating system.
Pitt's Getting started with HTML page
Linux
Download, Install deb/rpm or untar then in terminal run "sudo sh install_ppd.sh". Add from printer using "AppSocket/HP JetDirect" with hostname "dells5840.csb.pitt.edu"
For the driver, choose "Dell" and "Color". It should show the S5840cdn on the right.
Apple Mac: Dell_Color_S5840cdn.dmg
Add IP printer using "AppSocket/HP JetDirect" with hostname "dells5840.csb.pitt.edu"
Windows: Dell_Color_Printer_S5840cdn_Installer
Start installer. In Configure Printer Connection, choose "My printer is not listed". Choose "Host/IP Address Search" and enter "dells5840.csb.pitt.edu"
Linux
Download, Install deb in terminal with "sudo dpkg -i lexmark_network-scan-linux-glibc2_04122023_x86_64.deb". Add from printer using "AppSocket/HP JetDirect" with hostname "lexmark10th.csb.pitt.edu"
Apple Mac: Lexmark_UC1_PrinterSoftware_08042022.dmg
Add IP printer using "AppSocket/HP JetDirect" with hostname "lexmark10th.csb.pitt.edu"
Windows: Lexmark_Printer_Software_G4_Installation_Package_07062021.exe
Start installer. In Configure Printer Connection, choose "My printer is not listed". Choose "Host/IP Address Search" and enter "lexmark10th.csb.pitt.edu"
Add from printer settings, enter address for network search "10.226.0.7". Choose "AppSocket/HP JetDirect". When asked for printer driver, choose "Ricoh" for manufacturer and "Ricoh MP 305+ PS" for the driver.
If you do not see "Ricoh MP 305+ PS" as an option, you will need to setup the printer using the "Additional Printer Settings..." button.
Click Add and choose "Network Printer", "AppSocket/HP JetDirect" and enter for Host: "10.226.0.7"
After the "Choose Driver" comes up, select "Provide PPD file" and point to the ppd file from the link below.
Linux: Ricoh copier
Apple Mac: Ricoh Copier
Add IP printer using "AppSocket/HP JetDirect" with address 10.226.0.7
Windows: Ricoh Copier
Run the executable and start installer from unpacked location (RV_SETUP.exe). Choose "Click if you cannot find the device". Choose "Specify device IP address". Use "10.226.0.7" and click "Search" Add IP printer using "AppSocket/HP JetDirect" with address 10.226.0.7
Linux: Xerox VersaLink C500DN Printer
Download the deb or rpm file and install. Open a terminal to "/opt/XeroxOffice/prtsys/" and run "sudo xeroxofficeprtmgr". Enter the printer address as "xerox7.csb.pitt.edu" (7th floor) or "xerox8.csb.pitt.edu" (8th floor) and select the driver (should only be one).
Apple Mac: Xerox VersaLink C500DN Printer
Add IP printer using "AppSocket/HP JetDirect" with the printer address as "xerox7.csb.pitt.edu" (7th floor) or "xerox8.csb.pitt.edu" (8th floor)
Windows: Xerox VersaLink C500DN Printer
Add IP printer using "AppSocket/HP JetDirect" with the printer address as "xerox7.csb.pitt.edu" (7th floor) or "xerox8.csb.pitt.edu" (8th floor)